|
|
| |
S40HT
High Temperature 1/3 HP Effluent Pump |
Download
Product Brochure
Download Product Manual |
 |
Features
and Benefits
| • |
All cast iron housing, volute case, and impeller resists the most extreme corrosive environments |
|
• |
Rugged-built, oil-filled motor for continuous bearing lubrication and maximum heat dissipation |
|
• |
Heat sensor overload protection with automatic reset when motor cools to a safe operating temperature |
|
• |
Lower ball bearing eliminates sleeve bearing wear and reduces motor wear |
|
• |
Non-clog vortex style, ejector vanes for seal protection |
| • |
Allows easy disassembly after extended service |
|
• |
Prevents oil loss from - and moisture protection for - motor |
|
• |
Permanently lubricated for long life |
| • |
Heavy-duty lift-out ring |
|
Product Capabilites
| Capacities: |
45 GPM |
170 LPM |
| Shut-Off Head: |
21 ft. |
6.4 m |
Operation: On
|
13.5 in.
|
343 mm |
| Off |
4.5 in. |
114 mm |
| Operation: S40HT-11P |
manual and automatic |
| Solids Handling: |
3/4 in. |
19 mm |
| Liquids Handling: |
high temperature liquids |
| Intermittent Liquid Temp.: S40HT-11P |
up to 194°F |
up to 90°C |
| S40HT-11 |
up to 200°F |
up to 93°C |
| Motor Electrical Data: |
1/3 HP,
12.0A, thermal overload protection, oil-filled, 115V, 1Ø, 60Hz, 1550 RPM |
| Acceptable pH Range: |
6–9 |
| Mechanical Seal: |
Type 6A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts |
| Bearings: |
Lower ball, upper sleeve type, oil lubricated |
| Housing/Volute Case/Impeller: |
Cast iron |
| Exterior Hardware: |
Stainless steel |
| Power Cord: |
20',
16/3, SJOOW-A/SJOW
with integrally grounded three-prong plug |
| Discharge, NPT: |
1-1/2 in. |
38.1 mm |
| Min. Sump Dia. Simplex: |
18 in. |
45.7 cm |
| Min. Sump Dia. Duplex |
30in. |
76.2 cm |
|
Product Performance Chart
|
|
