|
|
| |
MW50
1/2 HP Residential and Light Commercial Sewage Pump |
Download
Product Brochure
Download Product Manual |
 |
Features
and Benefits
|
• |
Enclosed design for high-efficiency pumping |
|
• |
Eliminates possibility
of jamming between impeller and volute |
|
• |
Passes full 2”
solids |
|
• |
Original performance
can be restored if wear occurs by replacing volute seal ring |
|
• |
Oil-filled motor
for maximum heat dissipation and continuous bearing lubrication |
|
• |
High-torque, permanent
split capacitor (PSC) motors; no starting switches or relays to wear out |
|
• |
Field-tested, wide-angle, mercury-free piggyback mechanical float switch provides maximum drawdown (automatic models only) |
• |
Long, flexible type 6 seal provides high-pressure sealing with improved seal face protection by location |
• |
Lower ball bearing eliminates sleeve bearing wear and significantly reduces motor wear |
• |
Low-amp draw from the efficient PSC motor means less heat build-up |
|
| TWO-VANE IMPELLER
DESIGN PROVIDES MAXIMUM PUMP EFFICIENCY. DURABLE MOTOR WILL DELIVER MANY YEARS
OF RELIABLE SERVICE. |
Product Capabilites
| Capacities: |
135 GPM |
510 LPM |
| Shut-Off Head: |
27 ft. |
8.23 m |
| Solids Handling: |
2 in. |
50.8 mm |
| Liquids Handling: |
drain water and domestic sewage |
| Intermittent Liquid Temp.: |
up to 140°F |
up to 60°C |
| Motor Electrical Data: |
1/2 HP, 1625 RPM,
PSC (1Ø), oil-filled,
115V, 9A, 1Ø, 60Hz;
230V, 4.5A, 1Ø, 60Hz |
| Acceptable pH Range |
5–9 |
| Housing: |
cast iron |
| Power Cord: |
20 ft., 16/3, SJTW |
| Discharge, NPT: |
2 in. |
50.8 mm |
| Impeller: |
thermoplastic
|
| Volute Case: |
class 30 cast iron
|
| Shaft Seal: |
type 6, carbon & ceramic |
Minimum Sump Diameter: Simplex
Duplex |
24 in.
36 in.
|
61 cm
91.4 cm |
|
Product Performance Chart
|
|
