ENGINEERED RESIDENTIAL
 

Print  print

Performance

Product Images

Model MPL Series
Convertible Deep Well Jet Pumps, 1/2 thru 1-1/2 HP, Thermoplastic

Durability and corrosion resistance are built into every MPL Series Pump, due to the rugged fiberglass reinforced thermoplastic construction.  The engineered composite components are lightweight yet extremely resistant to sand and abrasive wear.  The non-corrosive design and esceptional strength assure years of trouble-free operation.

Key Features
  • Pump body is Dura-Glas® fiberglass reinforced thermoplastic -- lightweight, rustproof, and exceptionally strong.  All components in contact with water are resistant to the corrosive and abrasive forces found in the most aggressive water conditions.
  • Multi-port, reinforced polypropylene precision diffuser design primes faster and handles more air
  • Presicion-molded Noryl® impeller gives perfect balance and ultra-smoothness for highest performance and efficiency
  • Performance-proven, simple, built-in pressure regulator is adjustable for best performance on all deep well installations.  Pressure gauge included, as well.
  • Stainless steel heat sink provides maximum cooling of the mechanical shaft seal
  • Dustproof canopy on motor completely encloses electrical components and provides dust, dirt and insect protection.  Ventilating air cannot contaminate vital switching components.
  • Pump can be disassembled without disturbing the piping for easy serviceability.  "Control room" motor design makes all motor components easily accessible for service.
Warranty

Whichever comes first:
12 months from date of original installation, or
18 months from date of manufacture

See your dealer for details

Specifications    
Resources    

 

PUMP BODY CONSTRUCTION:  Dura-Glas (R)

HORSEPOWER:  Available in 1/2, 3/4, 1, and 1-1/2 HP

MAXIMUM CAPACITY:  26.3 GPM (model MPLF in Shallow Well Setup)

FLOW at 10' LIFT and 40 PSI:  13.8 GPM (model MPLD in Shallow Well Setup)

MAX LIFT:  120' (model MPLF in Deep Well Setup)

MAX SHUT-OFF PRESSURE:  72 PSI (model MPLC)

MAXIMUM TOTAL PRESSURE (Inlet + Pump Pressure):  MPLC: 72 PSI / MPLD: 62 PSI / MPLE: 62 PSI / MPLF: 64 PSI

PRESSURE SWITCH SETTING:  30 - 50 PSI

SUCTION SIZE:  1-1/4" NPT

DRIVE SIZE:  1" NPT (suction - over - drive)

DISCHARGE SIZE:  1" NPT

AMP DRAW (full load):  (Model & Voltage Dependent)

VOLTAGE:  230 / 115 AC, 60 Hz

RECOMMENDED BREAKER:  (HP and Voltage Dependent)

MAXIMUM WATER TEMPERATURE:  140 F (60 C)

IMPELLER:  Noryl (R)

NOZZLE:  Noryl (R)

VENTURI:  Noryl (R)

O-RING:  Buna-N

CLAMP:  Stainless Steel

SHAFT:  Stainless Steel

DIFFUSER:  Reinforced polypropylene with brass wear ring

:  . . . Noryl(R) is a registered trademark of SABIC Innovative Plastics IP BV

Owner's Manual: MPL, MFL
DOWNLOAD MANUAL
Specifications: MPL
DOWNLOAD SPECS
Instructions: Pressure Switch Adjustment
DOWNLOAD INSTRUCTIONS
More Resources Available In Our Resource Center
GO TO RESOURCE CENTEROPEN RESOURCE CENTER IN NEW WINDOW